TFR-PRO NON CAUSTIC is a heavily formulated traffic film remover designed to remove the most stubborn of stains and dirt from vehicles and machinery. With an acive component of over 70% this is the most concentrated TFR traffic film remover available in the UK market. This formulation replaces caustic ingredients with a specific blend of bio-loop surfactants and orange oils that duplicate the cleaning power of alkalis without the harsh ph.

How to Use TFR-PRO with a Pressure Washer

Step 1 - Dilute the TFR-PRO
If your pressure washer has a chemical feed system, pour TFR-PRO into the machine at your desired dilution ratio. We reccomend 1:20 for light/general use. This can be incresed to 1:5 for heavier soiling ie. use on tractors and artic curtrains.

Step 2 - Apply to the Vehicle
Spray the vehicle using the pressure washer lance, setting your chemical pickup dial to 1-2%. This will provide an even, light layer of TFR-PRO across the vehicle's surface.

Step 3 - Rinse the Vehicle

How to Use TFR-PRO While Hand-Washing

Step 1 - Dilute the TFR-PRO
Dilute TFR-PRO with water at a ratio of up to 1:20.

Step 2 - Apply to the Vehicle
Using a handheld pump sprayer, apply the diluted TFR-PRO evenly to the vehicle. Let it sit for about 2 minutes, then agitate the surface to help lift the dirt.

Step 3 - Rinse the Vehicle
Rinse the vehicle thoroughly using a pressure washer. Watch as TFR-PRO effortlessly strips away dirt, leaving your paintwork gleaming.

Allow the product to sit for a few minutes to let TFR-PRO break down dirt and grime. For heavily soiled areas, gently agitate with a soft brush. Then, use the pressure washer without the chemical feed to thoroughly rinse off the remaining suds and residue.

SAFE FOR USE ON ALUMINIUM